HCR - Solvent Removable Glossy Sticker

wishlist icon
cart icon 0

HCR Solvent Removable Glossy Sticker

  • Product Code: CRS1050-45/CRS1054-45/CRS1060-45
  • $98.00
PRODUCT CODEBRANDWIDTHLENGTH
CRS1050-45HCR1.27m45m
CRS1054-45HCR1.37m45m
CRS1060-45HCR1.52m45m
Qty

This product is temporarily out of stock. You may opt-in our waiting list and we'll notify you once the product is restocked.

Share
Specification
规格



Calendered monomeric soft PVC film, 100±10um thickness, gloss white colour, clear solvent based removable pressure sensitive glue, double sided polycoated kraft paper liner
压延、单聚合物、软质PVC,100±10um厚度 ,高光清白,溶剂型可移性透明压敏胶 ,双塑底纸
Advantage
优点

Brilliant colour print for indoor and outdoor use
室内和户外用途的亮丽彩色打印


Min or no glue residue on clean glass, bakeable paint , stainless surface
贴于干净玻璃、烤漆、不锈钢板表面不会有残胶
Application
产品用途

Signage display, airport and subway graphics application.
适用于标牌展示、机场、地铁广告等
Compatibility of printers and ink
适用机型与油墨

Media is suitable for all solvent and eco solvent, latex and UV printers. Original ink from the printer manufacturers is recommended for optimal print result.
适用于有加热系统的溶剂型、弱溶剂型喷绘机,LATEX 和 UV打印机。原厂油墨应用于最佳打印效果
Application precaution
使用注意事项

Recommended to use soft UV ink when printing with UV printer, to avoid crisp case when using neutral or hard UV ink.
本产品在使用UV设备打印输出画面时,建议使用UV软质墨水。在使用中性或硬质UV墨水输出画面时会产生产品脆裂现象


When printing with solvent and eco solvent printer under high ink output or full page condition, the PVC will deform at the edge due to shrinkage caused by solvent ink curing. It is recommended to allow a border of 5mm and 1-2 days for ink to cure.
本产品在溶剂和弱溶剂设备打印应用,大出墨量和满版打印时,由于溶剂对PVC的腐蚀,产生PVC收缩变形、粘贴时容易产生翘边现象。 建议有个5mm 边框和让墨水1至2 天固化


The adhesive side of product cannot face to sunshine otherwise the UV ray will damage the glue property and cause more adhesive residue.
本产品胶水面不允许面对着阳光,紫外线会破坏胶水性能,导致残胶增加


Length of outdoor use depends on the outdoor environment
户外使用时间长短取决于室外环境